PEX Repiping Near Me
Starting price: Call for pricing
PEX repiping replaces a home's old water pipes — galvanized steel, corroded copper, or failing polybutylene — with flexible PEX tubing run through walls, attics, and crawl spaces. PEX resists corrosion and scale, and its flexibility means fewer joints and fewer wall openings during the work. This service is for homeowners with recurring leaks, low pressure, or discolored water caused by aging pipe.
What PEX repiping actually is
Repiping means taking out the water pipes that carry water to your sinks, showers, toilets, and appliances, and putting new ones in their place. With PEX, the new pipes are a flexible plastic tubing — cross-linked polyethylene — that snakes through walls and ceilings the way a cable does. Because it bends around corners instead of needing a soldered joint at every turn, a repipe uses far fewer fittings behind your walls. Fewer fittings means fewer places for a leak to start.
PEX does not rust, pit, or grow scale inside. Metal pipes narrow over time as minerals crust their inner walls, which is why old homes slowly lose water pressure. PEX keeps its full diameter, so the shower pressure you get on day one is the pressure you keep. It also handles freezing better: the tubing can expand slightly when water turns to ice, where rigid pipe splits open.
The signs your pipes are done
- Water runs brown or rusty when you first turn on a tap
- Pressure has been sagging bit by bit for a long time
- You have fixed two or more pipe leaks in recent memory
- Pipes bang or rattle when a faucet shuts off
- The water has a metallic taste that was not there before
- Your home still has galvanized steel or polybutylene pipe
How a repipe goes, from walkthrough to water on
We start by walking the house and mapping how water gets to every fixture today. That map decides the new layout — usually a manifold with individual runs to each fixture, or a trunk-and-branch design that follows the existing framing. You get a written plan before anything is opened.
Then the work begins. We open small access points in walls and ceilings, pull the PEX through, and connect it with mechanical fittings — no torch, no solder, no flux residue. Old pipe comes out where it is reachable; where it is sealed inside finished walls and cannot be removed without tearing the house apart, it is abandoned in place and capped. Every new line is pressure tested before any patching starts. Finally the access points are patched, fixtures are reconnected, and we run water at every tap to check flow and look for drips.
PEX versus patching the old system again
A spot repair fixes the leak you can see. It does nothing about the next one forming three studs over. When a plumbing system has reached the age where leaks come in clusters, each repair costs a visit and leaves the rest of the tired pipe in the walls. Repiping resets the clock on the whole network at once.
That said, a full repipe is not always the answer. If the pipes are sound and the problem is one failed joint or one bad section, a repair is the right call and we will say so. The camera and the walkthrough decide, not a script.
What drives the cost of a repipe
Size and layout run the number. A compact single-story home with a crawl space is the simplest repipe there is; a large two-story with slab floors and finished ceilings takes more access work and more pipe. The fixture count matters — every bathroom, kitchen, laundry, and hose bibb is another run. The condition of the existing pipe matters too, because corroded fittings take longer to remove and patch.
Permits and inspection are part of the job and factor into scheduling. What does not change is this: we quote the whole project before work starts, and we explain what is in the number when you call (833) 513-2401.
The homes around Stockton this work fits best
Plumbing Services Pros repipes single-family homes across the Stockton area, and the pattern is consistent: homes built with galvanized steel supply pipe are now at the age where rust, pressure loss, and pinhole leaks stack up. Rental owners repipe to stop the drip of emergency calls. Buyers of older homes repipe right after closing, before the walls get painted and furnished.
If your water looks off, your pressure keeps sagging, or you are tired of fixing one leak after another, call (833) 513-2401. We will walk the house, show you what we find, and give you a straight answer on whether a repipe is the fix.
Features
- Full replacement of aging supply pipes with PEX tubing
- New manifold or trunk-and-branch layout for balanced pressure
- Removal and disposal of old galvanized or copper pipe
- New shutoff valves at fixtures where access allows
- Pressure testing every new line before walls are closed
- Drywall patching of access openings after the pipe work
- Walkthrough inspection of fixtures and flow when the job is done
Benefits
- Steady water pressure at every fixture in the house
- No more rust-colored or metallic-tasting water
- Fewer surprise leaks inside walls and ceilings
- Pipes that flex instead of splitting when water freezes
- Quieter pipes with less banging and hammering
- A plumbing system sized and routed for the way the home is used today
- Confidence knowing the full pipe network was renewed, not patched
Frequently asked questions
How do I know if my home needs a full repipe?
A plumber from Plumbing Services Pros looks at the pipe material, the age of the home, leak history, and water quality. Galvanized steel with rust, copper with pinhole leaks, or polybutylene are all strong candidates for replacement. If the pipes are mostly sound with one bad section, a targeted repair may be enough.
Can we stay in the house during a repipe?
Yes. Most families stay in the home while we work. Water is shut off only while sections are being swapped, and we restore service at the end of each workday. The job is planned so kitchens and bathrooms are usable overnight.
What makes PEX better than the old pipes in my walls?
PEX is a flexible plastic tubing that does not corrode or build up scale the way metal pipe does. It can expand slightly if water freezes inside, which helps it survive cold snaps that split rigid pipe. It also installs with fewer fittings behind walls, which means fewer potential leak points.
How much does a whole-house PEX repipe cost?
Cost depends on the size of the home, the number of bathrooms and fixtures, how the pipes are routed today, and how much wall and ceiling access the job needs. A small single-story home and a large two-story home are very different projects. Call (833) 513-2401 for an on-site look and a quote.
Does PEX replace every pipe, including the ones outside?
Yes, but selectively. PEX is designed for interior supply lines — it cannot sit in direct sunlight for long periods, so outdoor above-ground runs still use other materials. The main service line from the meter is a separate decision we make during the walkthrough.
What happens to my walls and ceilings after the repipe?
Walls and ceilings are patched where they were opened, and we aim to keep the openings small and tidy. Texture matching on older walls may need a painter's touch afterward — we will tell you honestly what to expect before the work starts.